The key points of daily maintenance of the slitting and rewinding machine still need to be roughly understood, and the later maintenance can prolong the service life of the equipment, so everyone knows what are the key points of maintenance in the daily use of the slitting and rewinding machine?
The key points of maintenance in the daily use of the paper slitting and rewinding machine are as follows:
(1) The power supply should be safely grounded to ensure no leakage.
(2) If the user needs a workpiece with a special cutting width, it can be made into various types of special gaskets of our company.
(3) The lubricating hole is regularly filled with oil to prevent the rotating shaft from wearing due to lack of normal lubrication.
(4) Pay attention to safety when using, and do not put your hands on the blade when the machine is turning.
(5) When the nylon gasket needs to be used for a long time, if the cutting burr is seriously damaged, the work should be stopped immediately.
We know that the use of the paper slitting and rewinding machine has a very good effect on the treatment of paper. We also need to do some ways to reduce the wear and tear of the paper slitting and rewinding machine as much as possible. The key points of maintenance in the daily use of the slitting and rewinding machine are mainly those introduced above. When we use the slitting and rewinding machine daily, we all need to understand the above key maintenance points.
During the use of the paper slitter rewinder machine, it is easy to break down if you are not careful, so everyone knows what should be paid attention to when using the slitting and rewinding machine?
The power supply of the slitting and rewinding machine must be safely grounded during use, and the personal safety of the operator must be ensured. When starting up, the speed of the host must be adjusted to the lowest speed, and when installing the blade, it is necessary to prevent being scratched by the blade. After the non-woven fabric slitting and rewinding machine has been used for a period of time, regular maintenance should be carried out on the place where the machine is refueled. In addition, it is equipped with a double-sided sharpening system and is made of diamond, so pay attention when using it. Take care of it to keep the blades sharp for a long time.
The slitting and rewinding machine is used for high-speed slitting and packaging of various non-woven fabrics, films, and paper. The motor control system of the slitting and rewinding machine is centrally controlled by Japanese Panasonic PLC. Monitoring the working status, the control system has the functions of constant speed lifting, parking and anti-loosening, meter and fixed length, parameter saving, etc., and the operation is very simple. When using the slitting and rewinding machine, we all need to pay more attention to the above precautions. We need to operate and use our machine in the correct way.
